Set up Bitcoin Mining in the local network (LAN) with BitMain S3 for Solo -Mining
Hello,
Thank you for getting stimulated! Bitcoin mining in your local network (LAN) with the latest firmware version of the BitMain S3 with ASIC. Don’t worry as a NOOB, this is just a further step in the process, and we will take it one step.
Before we start
In order to set up a solo mining on your LAN with BitMain S3, you must make sure that:
1.
2.
- You have installed a compatible operating system on your computer.
Hardware requirements
You need some specific components for solo mining:
* BitMain S3 Asic : Make sure it is the latest model (10.2) with the correct firmware version.
* Power supply : A sufficient power supply unit (PSU) to meet the energy requirements of the ASIC.
* Cooling system : An effective cooling system such as liquid cooling or heat sink and fan combination.
Software requirements
You will need:
- Miner software : You can use any popular miner software, such as: B.:
* Cgminers
* Easyminer
* Minergate
- Wallet software : A compatible wallet like metamask or electrum.
- Operating system :
Set up Solo -Mining on Bitmain S3
After treating the hardware requirements, we immerse yourself in the Setup process:
1.
- Install the miner software : Download the miner software of your choice and install them.
- Configure the Miner software :
* Set up the mining pool (if this uses).
*
* Add the ASIC to the list of connected devices of the Miner software.
- Connect BitMain S3 to your operating system :
Set up Solo mining on LAN with Bitmain S3
After you have set up your solo mining setup, we focus on setting it up on your local network (LAN):
- Configure network settings :
* Set the IP address for your network.
* Configure the subnet mask, gateway and DNS server addresses.
2.
- test mining speed :
* Start the Miner software and monitor the Hash rate output.
* Adjust the settings as required to achieve optimal performance.
Error fixing tips
As a NOOB, you can encounter some problems during the furnishing process. Here are some tips for troubleshooting:
.
.
Diploma
The establishment of Solo -Mining in a BitMain S3 with LAN requires a technical know -how. With this guide, however, you should be able to achieve success. If you encounter problems during the Setup process, you are welcome to ask yourself about online resources. Happy mining!
Hope that helps! Let me know if you have any questions.
